如果免费资源下载的文件为TXT文档 请联系站长更新！站长微信：Lv596999 Telegram：@eapoj “Mql5官网”板块的EA基本都有，大部分是无限制NODLL版，NODLL版本MT1420升级，大多数不可用！这些EA来源为国外花钱买过来的 如有需要，请联系站长！ “EA测评”板块资源全部现有，看见不错的，可以联系站长，看EA在确定是否收费。 “无限制EA”板块，大部分免费，下载文件全部存在，都可以免费下载。 站长硬盘EA太多，因大部分时间做交易，做风控，没太多时间更新下载地址，请谅解！ 需要更新下载文件，请联系站长微信！国外朋友请联系Telegram。  |
The DYJ ADX is based on ADX indicator.
It can be used for any currency pair and timeframe.
The DYJ ADX recommends buying when +DI is higher than -DI, and selling when +DI sinks lower
than -DI.
The DYJ ADX works in any trading session. The work time1 and work time2 and work time3 parameter is
intraday. It means that if you want to set a working time from 19:00 PM to 05:00 AM, for example, you should define two different intervals,
such as 19:00 to 23:59 and 00:00 to 05:00.
The EA opens orders at a specific news time, such as 19:59 to 20:03 and M1 to H1 timeframe.
Features
- Monitors all pairs at the same time.
- The EA monitors the top 23 pairs by default, but you can select less pairs if you wish.
- Monitors every timeframe, from 1 Min to Monthly.
- It is a multi-currency EA that can be run from a single chart (M5 to D1,recommended timeframe – H1).
- Allows you to set up a working time or a specific news time.
- Usually, the winning rate of profit in three orders is above 95%.
Input parameters
General setting
- InpPairs =
“GBPUSD,EURUSD,USDJPY,USDCHF,XAUUSD,USDCAD,GBPJPY,EURJPY,EURGBP,EURAUD,EURNZD,EURCAD,CADJPY,AUDUSD,AUDNZD,AUDCAD,AUDJPY,NZDJPY,NZDUSD,NZDCAD,GBPAUD,GBPNZD,GBPCAD,CHFJPY,NZDCHF,AUDCHF,EURCHF,USDSEK,USDNOK,USDZAR,USDDDK,USDCNH,USDHKD,USDPLN,USDSGD”
– comma-separated list of symbols to be traded. If empty, the current MARKET WATCH symbols will be used.
- m_magic = 62715815 – EA’s magic number.
- InpTimeFrame = H1 – TimeFrame.
StrategySetting
- InpAdxMethod = DIADX – Adx Method
- InpTrendLevel = 30 – Trend Level for ADX
TradingSetting
- InpLotExponent = 1.0 – Lot Exponent. Number of global Add lots, if it is 1, does not increase
- InpIsAddedNF = false – Whether to add lots to non-forex of symbol
- InpLots = 0.01- lots
- InpAllPairsMaxOrders = 100 – MaxOrders
- InpMaxOrders = 1 – Max Number of Orders Symbol
- InpCurrentOrders = 1 – Current Orders Number
- InpMaxProfits = 10 – InpMaxProfits($)/0.01Lots When the orders is greater than OrdersNumber, and total profit is InpMax Profits, close all
orders. - InpTakeProfit = 2100 – TakeProfit(in pips) . Please keep your stop loss and stop profit equal.（ 600，900，1500，1800，2100 etc.）
- InpStopLoss =2100 – StopLoss(in pips) .（600，900，1500，1800，2100 etc.）
- InpNewTP = 700 – L’order TP(Increased,in pips) for GrowthRat.Please keep your InpNewTP at one third of Stoploss or TakeProfit.
- InpLStopLoss = 1400 – L’order SL(in pips):InpLStopLoss=InpNewTP(500);InpLStopLoss should not be greater than 2/3 of InpStopLoss
- InpIncreasedProfit = 10 – Increased Profit($) for GrowthRat
- InpAdjusDistance = 0 – Automatically adjust Stoploss and TakeProfit increments to avoid shocks in the event of shocks.Usually the usage value is
300 or 500. if it is 0, is not adjusted - InpTrailingStop = 100000 – TrailingStop
PendingOrderSetting
- InpUsePending = NormalOrders – Additional Pending orders. There are six pending selection modes: NormalOrders, StopPending,
LimitPending, StopandLimitPending, BothOending, BothLimitPending - InpExpiration = 1440000 – Expiration（minutes）
- InpPendingCounts = 1 – Pending Counts
- delta = 200 – step between them (in pips)
- distance = 200 – distance from current price(in pips)
TraeTimeSetting
- InpIsUseTradingTime = false
- startPeriod1 = “08:15”
- endPeriod1 = “08:35”
- startPeriod2 = “13:45”
- endPeriod2 = “14:42”
- startPeriod3 = “22:15”
- endPeriod3 = “22:45”
DisplayAndClosingSetting
- PROFIT=10000.00 – Force close all postion of symbol at PROFIT
- TOTALPROFIT=20000.00 – Force close all postion at TOTALPROFIT
- ButtonsInARow = 4 – Buttons in a horizontal row
- XShift = 20 – Horizontal shift
- YShift = 20 – Vertical shift
- XSize = 160 -Width of buttons
- YSize = 21 – Height of buttons
- FSize = 10 – Fort size
