Mql5官网 MAtsi 外汇EA

Professional 0 Lag MAs Trend Sensor Indicator

MAtsi is a trend sensor indicator, where 2 MA-s operates simultaneously.
It is designed to cover
a wider range of dynamic trends, where MAiis not so effective.
Included averages are described in MAi indicator code section.
MAtsi indicator can run many instances, for all time frames
at once, so you can test and compare results with different settings.
It is very fast and has, like all our indicators, a
built-in “slider history testing” technology.
Program is design to operate in 2 automatic modes:

1. Slider mode

Turns on when attaching the indicator to the Chart or Visual Tester.
Here you can test/set your
settings back in history with “slider” up to 32767 bars.
So, while Visual Testing EA, you can attach the indicator and
easily adjust input parameters for critical points.
On Tester (only) you can exit “Slider mode” by
pressing the <Esc> key.
You can easily switch between time frames on the selected position and compare the
results.
Please watch “switching” in HD … https://youtu.be/tAoB4FPTrRU

2. Expert mode

Turns on when starting the indicator through expert with “iCustom” function.
It is designed only for EA use and “slider
history testing” is disabled.
Indicator is equipped with “Error control”, so that you can always see what is going
wrong and correct this.
It is tested and works very well in our EA “PointerX”.

Please watch “testing” in HD … https://youtu.be/2qh3qTaGVAE

How to trade with MAtsi?

When LINE_1 goes up and is above LINE_2 you BUY, when LINE_1
goes down and is below LINE_2 you SELL.
You also have some other options (use in combination with our indicators,
use in certain other indicators …).
We recommend to run more instances of indicator on different timeframes,
with different settings for better results (M15, H1, H4).

For programmers

You can include in EA-s “enum method” code. (please see MAiindicator code section)
The known commands to retrieve current and previous value are for MQL4:

double L1Cur=iCustom(NULL,MAtsi_TF_,"MAtsi",L1_MTD_,L1_st_,L1_sm_,L1_vf_,L1_lam_,L2_MTD_,L2_st_,L2_sm_,L2_vf_,L2_lam_,1,0,1);
double L1Prev=iCustom(NULL,MAtsi_TF_,"MAtsi",L1_MTD_,L1_st_,L1_sm_,L1_vf_,L1_lam_,L2_MTD_,L2_st_,L2_sm_,L2_vf_,L2_lam_,1,0,2);
double L2Cur=iCustom(NULL,MAtsi_TF_,"MAtsi",L1_MTD_,L1_st_,L1_sm_,L1_vf_,L1_lam_,L2_MTD_,L2_st_,L2_sm_,L2_vf_,L2_lam_,1,1,1);
if(L1Cur>L1Prev&&L1Cur>L2Cur) buyMAtsi_=true;
if(L1Cur<L1Prev&&L1Cur<L2Cur) sellMAtsi_=true;

where:

NULL = current symbol
MAtsi_TF_ = enum_timeframes
“MAtsi” = path/name of the custom indicator compiled program

L1(2)_MTD_ = line_1(2) method (from 0-16)
L1(2)_st_ = line_1(2) step
L1(2)_sm_ = line_1(2) smooth (lines smoothness)

L1(2)_vf_ = line_1(2) v_factor (volume factor)
L1(2)_lam_ = line_1(2) lambda
1 = last bar (1 for precise results,
because bar 0 is usually not completed)
0(1) = line index
1(2) = shift

MAtsi input parameters settings

The order from left to right is: name, [default value], min-max value.
If you accidentally enter a lower or higher
value, the min-max value is used.

• L1_method [LSMA] – line_1 method
• L1_step [35] 0-100 – line_1 step
• *L1_smooth [0] 0-100 – line_1 smoothness
• *L1_v_factor [1.0] 0.0-50.0 – line_1 volume factor
• *L1_lambda [0.3] 0.0-100.0 – line_1 lambda (enabled only for REMA, REMA_Hull)
• L2_method [MDEMA] – line_2 method
• L2_step [8] 0-100 – line_2 step
• *L2_smooth [0] 0-100 – line_2 smoothness
• *L2_v_factor [1.0] 0.0-50.0 – line_2 volume factor
• *L2_lambda [0.3] 0.0-100.0 – line_2 lambda (enabled only for REMA, REMA_Hull)
• LastBar [0] 0-6000 – drawing the last bar (left-right descending order, 0 is the last)
• PastBars [100] 1-6000 – bars drawing to the past (to the left)

*for certain methods is disabled, depending on the nature of the MA-s

Additional information

The demo version is built to demonstrate the main features and usability of MAtsi, MAtsiDemo.

If you like to use MAtsi unlimited or within an EA you have to buy or rent this product.
Are you satisfied with our
work? Share your experiences and leave a comment.
If you need help using our trading tools or you have an issue or question, please
contact me.
VLabs